HOW TO SPOT OLD IRONSIDES FAKES IDS: 7 RED FLAGS YOU CAN T IGNORE
Old Ironsides Oldironsidesfakes fake id s glut the commercialize because the name carries angle real IDs from this trafficker are known for crease holograms and tight security features. Scammers work that repute by slapping the Old Ironsides logo on low-quality knockoffs. If you re holding one, these seven red flags will tell you in seconds whether it s legit or a scam.
WHAT EXACTLY IS AN OLD IRONSIDES FAKE ID?
An Old Ironsides fake is any ID that claims to be from the Old Ironsides trafficker but fails to match the marketer s current product standards. Real Old Ironsides IDs use a specific polycarbonate core, integrated holograms, and UV ink that glows under 365 nm get off. Fakes often skip the core, use stick-on holograms, or print UV ink that only reacts under 395 nm. The remainder isn t perceptive it s the gap between a 200 ID and a 20 knickknack.
Real Old Ironsides IDs are made in moderate batches with serialized tracking. Each batch has a unique QR code that scans to a substantiation page on the vender s site. If the QR code is lost, leads to a dead link, or shows a generic wine ID verified message instead of mint-specific inside information, you re looking at a fake. Scammers can t replicate the trafficker s backend system, so they either skip the QR or copy a atmospherics project from a real ID.
HOW CAN I TELL IF THE HOLOGRAM IS REAL OR A STICKER?
Real Old Ironsides holograms are integrated in the polycarbonate stratum and transfer colors when tipped under direct get down. The primary quill hologram shows a ship s wheel around that rotates 360 degrees, with microtext around the rim that reads OLD IRONSIDES in 0.2 mm font. Fakes use a pricker or a laminated overlay; the wheel looks flat, the microtext is blurry or lost, and the colors don t transfer smoothly.
Run your fingernail across the hologram. If it catches or feels raised, it s a spine. Real holograms are flush with the card surface. Also check the edges real holograms fade into the card stuff, while stickers have a sharp, seeable border. If the holograph peels when soaking in warm water for 30 seconds, it s a fake.
WHAT S THE DEAL WITH THE UV INK HOW DO I TEST IT?
Real Old Ironsides IDs have UV ink that glows bright putting green under a 365 nm UV unhorse. The ink forms a repeating model of the vender s logo and the submit seal, panoptical only on the front and back. Fakes either skip UV ink entirely or use dirt cheap ink that glows blue under 395 nm, the wavelength of most call up flashlight UV attachments.
Buy a sacred 365 nm UV torch phone attachments won t cut it. Shine it on the ID in a dark room. If you see a conk blue glow or no glow at all, it s fake. Real UV ink pops in a flash and doesn t smirch when rubbed with a damp material. If the ink smudges or fades, the ID was printed on a monetary standard inkjet or laser printing machine.
IS THE FONT ON THE ID A DEAD GIVEAWAY?
Yes. Real Old Ironsides IDs use a proprietary font named OI-Secure for all variable star text name, address, DOB, and ID come. The font has a slight right lean, fast kerning, and a unique 4 with a closed top. Fakes default to Arial, Times New Roman, or a free font like IDAutomationHC39M, which has wider spacing and a different 4 form.
Print a real ID templet from your state s DMV internet site. Overlay the fake ID on top and hold it up to a dismount. If the letters don t ordinate absolutely, the font is wrong. Also the I in ID real OI-Secure font has a modest serif at the top; fakes usually don t.
WHY DOES THE MAGNETIC STRIPE MATTER, AND HOW DO I CHECK IT?
Real Old Ironsides IDs have a high-coercivity magnetic streak encoded with the same data as the front of the card. Fakes either skip the stripe or use a low-coercivity streak that demagnetizes after a few swipes. Swipe the ID through a card subscriber if it beeps but shows disorganised data or nothing at all, the streak is fake.
Use a free magstripe reader app on your ring. Swipe the ID and compare the output to the written data. If the name, ID come, or expiry date doesn t oppose, the stripe wasn t encoded decent. Real stripes also have a smooth, homogenous texture; fakes feel rough out or have telescopic glue lines where the stripe was applied.
HOW CAN I VERIFY THE MICROPRINT WITHOUT A MICROSCOPE?
Real Old Ironsides IDs have microprint in three locations: around the holograph, along the submit seal, and under the photograph. The text reads OLD IRONSIDES SECURE in 0